4 Pack Of M8 Spindle Rods Extra Long M8 (8Mm) White For Safety Gates

Description

4 Pack of M8 Spindle Rods Extra Long M8 (8mm) White for Safety Gates
Product Description
Baby Gate Guru has made it a mission to make installing your safety gates a more convenient and stylish experience. With a line of extra long spindle rod and wall protector accessories you can now fit your pressure mounted gates in more places with ease, in colors that best match your gate and decor, and with materials that won't damage your walls.
Create a tight, secure fit even in wide spaces
Extra Long
These spindle rods measure 12cm (4.7 inches) in length, which may be significantly longer than the set that came standard with your gate. As a result, you may be able to achieve a more sturdy and reliable fit for your gate in more places.
Rubbery padded end helps grip the walls without causing damage
Matching adjustment wheel allows for an adjustable length and tight, secure fit
Spindle Rods Set
For Baby and Pet Safety Gates
This 4 pack of spindle rods from Baby Gate Guru is designed as a kit for lost or damaged spindle rods (the threaded bolts that push against the wall to hold the gate in place), commonly used in pressure mounted baby and pet safety gates.
Available in 2 standard sizes, M8 or M10, to fit your model of safety gate. M8 fits gates with a 7-8mm diameter opening. M10 fits gates with a 9-10mm diameter opening. See below for compatibility information.
M8 bolt diameter
12cm (4.7 inches) long
Works with pressure mounted gates
Check Your Compatibility
Brands Compatible with M8 (8mm) Spindle Rods
Regalo
Summer Infant
Carlson
Top Paw
Evenflo
Don't See Your Brand?
If you have any of the following brands you will want to
change to the M10 (10mm) size instead
: Dreambaby, Munchkin, North States (Supergate), Bindaboo, Safety 1st, Lindam, Baby Dan.
Brands listed here are not affiliated with this product and are listed solely for compatibility purposes.
Finding The Right Parts For Your Gate
Is Your Gate Pressure Mounted?
These spindle rods are designed to be used with
pressure mounted gates only
. Pressure mounted gates are installed by tightening the spindle rods against the surrounding wall or doorframe, creating tension that holds the gate securely in place. By contrast, hardware mounted gates are installed by screwing manufacturer-provided hardware into the walls, then connecting the gate.
Measuring Your Gate
If you are not sure which size will fit your pressure mounted gate, you can measure the holes that the spindle rods go into to determine the correct size yourself. An M8 screw's true diameter will measure slightly less than 8mm, so will fit nicely into a 7-8mm hole. An M10 screw's true diameter will measure slightly less than 10mm, and will fit nicely into a 9-10mm hole.
Use In Combination With Wall Protectors For Even More Length and Padding
Baby Gate Guru Spindle Rods are designed to fit perfectly with Baby Gate Guru Wall Protectors (sold separately).
Baby Gate Guru Wall Protectors can add an additional 1.25" (5/8" extra each side) in length to your installation, extending the maximum width of your gate even further to help it fit in wider openings.
Wall Protectors are designed to spread out the pressure against your wall over a larger padded surface area, protecting your walls even more from scuffs, paint scrapes, dents, and other damage.
Use In Combination With Y-Spindle Rods For Setup At The Bottom Of Staircases
Extra Long Baby Gate Guru Spindle Rods can help your gate installation reach new places, and when used in combination with Baby Gate Guru Banister Y-Spindle Rods (sold separately) you can even install your gate at the bottom of stairs!
Use 2-3 extra long spindle rods plus 1-2 extra long banister Y-spindle rods, depending on the design of your staircase, and your pressure gate can install securely against your stair banister.
Note that pressure mounted safety gates should never be installed at the top of staircases. Only hardware mounted gates are suitable there.
Colors Available
White, Bronze, Black
White, Bronze, Black
White, Bronze, Black
White, Bronze, Black
White, Bronze, Black
Used With
Walls, Doorways, Flat Surfaces
Walls, Doorways, Flat Surfaces
Staircases, Banisters, Angled Wall Corners
Staircases, Banisters, Angled Wall Corners
Walls, Doorways, Flat Surfaces
Regalo compatible
✓
✓
✓
Summer Infant compatible
✓
✓
✓
Carlson compatible
✓
✓
✓
Dreambaby compatible
✓
✓
✓
Munchkin compatible
✓
✓
✓
North States (Supergate) compatible
✓
✓
✓
8MM SIZE: This 4 pack of M8 spindle rods is designed to fit pressure mounted gates with an 8mm hole where the bolts go in. Please make sure you have the correct size for your gate.
COMPATIBLE WITH: Pressure gates from Regalo, Summer Infant, Carlson, Top Paw, and Evenflo. Don't see your gate's brand? Try switching to the M10 (10mm) size.
EXTRA LONG: Each spindle rod measures 12cm (4.7 inches) long, significantly longer than many alternatives, to help ensure a sturdy and reliable fit.
EXTEND THE WIDTH: If you are replacing 8cm (3.1 inch) long bolts, these extra long spindle rods can add just over 3 inches of extra reach to your gate, potentially helping you span a wider opening or achieve a sturdier fit.
ELEGANT COLORS: Choose between clean white, classic black, or elegant bronze to match or complement your gate. Colors are on both the rotating nut piece and the soft rubbery end for maximum elegance.