LS1 LS2 LS3 LS6 L92 Car Intake to Truck Front Accessory

Description

LS1/LS2/LS3/LS6/L92 Car Intake to Truck Front
Accessory
Most times you get a truck engine and want to run a car intake manifold; the problem you run into is the idler pulley and the belt on the truck alternator or power steering bracket. So, we came up with a way to make it work.
Now you will be able to use cable operated 75mm throttle bodies, but not the 90mm cable. You will need to remove your alternator/ps bracket to cut the standard idler mount off, and some grinding on the water neck will be needed to accept the ETC throttle body.
The LS2 manifold will work - you need to use the truck 85mm throttle body as the 90mm car throttle body does not clear the water neck.
The kit includes all components to make the swap: New idler pulley with the spacer, bolt and washer, new belt, new design truck water pump.
Please do not bid if you're not going to pay.
Freight discount for US Lower 48 States ONLY. International call for freight quote.