-40%
Vintage Burks Decatur E219 Centrifugal Pump, 1-1/2 x 1-1/4 NPT
Vintage Burks Decatur E219 Centrifugal Pump, 1-1/2 x 1-1/4 NPT
Vintage Burks Decatur E219 Centrifugal Pump, 1-1/2 x 1-1/4 NPT
Vintage Burks Decatur E219 Centrifugal Pump, 1-1/2 x 1-1/4 NPT
Vintage Burks Decatur E219 Centrifugal Pump, 1-1/2 x 1-1/4 NPT
Vintage Burks Decatur E219 Centrifugal Pump, 1-1/2 x 1-1/4 NPT
Vintage Burks Decatur E219 Centrifugal Pump, 1-1/2 x 1-1/4 NPT
Vintage Burks Decatur E219 Centrifugal Pump, 1-1/2 x 1-1/4 NPT
Vintage Burks Decatur E219 Centrifugal Pump, 1-1/2 x 1-1/4 NPT
Vintage Burks Decatur E219 Centrifugal Pump, 1-1/2 x 1-1/4 NPT
Vintage Burks Decatur E219 Centrifugal Pump, 1-1/2 x 1-1/4 NPT
Vintage Burks Decatur E219 Centrifugal Pump, 1-1/2 x 1-1/4 NPT

Vintage Burks Decatur E219 Centrifugal Pump, 1-1/2 x 1-1/4 NPT

$ 52.26

Availability: 100 in stock
  • Number of Phases: Does Not Apply
  • Brand: Burks Decatur
  • Return shipping will be paid by: Buyer
  • Condition: Please see the description and photos for details.
  • Outlet Diameter: 1 1/4 in
  • Modified Item: No
  • Custom Bundle: No
  • Country/Region of Manufacture: United States
  • All returns accepted: Returns Accepted
  • Item must be returned within: 60 Days
  • Refund will be given as: Money Back
  • Pump Housing Material: Cast Iron
  • Restocking Fee: No
  • Centrifugal Pump Type: Straight
  • Inlet Diameter: 1 1/2 in
  • MPN: E219

    Description

    Another item from GNL Designs, Great Northern Liquidation, Springfield, Vermont.
    Vintage Burks Decatur E219 Centrifugal Pump, 1-1/2 x 1-1/4 NPT
    This item was in the inventory of a closed contractor.  It turns and seems to be in working mechanical condition.  I see old weld repairs as shown.  I am unable to test this item but expect it to work reasonably well for general water use where any seeping at the welds or the gaskets is acceptable.
    I find it difficult to measure thread sizes by tape measure, but here's my conclusions (please check my work):
    The fitting on the end (inlet I think) measures roughly 1-3/4" diameter, and a reducer is installed as shown.
    Looking that up on an NPT chart, I think that works out to
    1-1/2" NPT.
    The fitting on top (outlet I think) measures roughly 1-5/8" diameter and has a reducer installed with an old copper pipe fragment in that.  Looking that up on the NPT chart, I think that works out to 1-1/4" NPT.
    Aside from the above, this pump has normal signs of age and handling over the years.  The coupling part mounted to the 3/4" shaft with keyway is included.
    Unpacked weight & size:  78.5, 20x12x12
    Packed weight & size:  90, 22x14x14
    Package Notes & Ref:  0I31
    :
    Note: If we are offering free shipping with this listing, free shipping only applies to the contiguous 48 United States. Please email for a shipping quote to Alaska, Hawaii, US territories, and international destinations.
    :
    If for any reason you are unsatisfied with your purchase, I offer a money back guarantee. This can be a full or partial refund (depending on the severity of the problem). In many cases you may not even need to return it. Please contact me through eBay's messaging service with a description of the issue and I will respond as soon as I see it.
    :
    Please also note that my liability for product defects is limited to the purchase price plus shipping. I am not responsible for the installation, training in the use of, or operation of any item I sell. The buyer assumes all responsibility for safely handling, inspecting and verifying the operational quality of their purchases prior to putting them into service. The buyer expressly releases the seller from any liability arising from the installation or operation of the product.